RSA Product Set: Security Analytics
RSA Product/Service Type: SA Series 4s Appliance
RSA Version/Condition: Dell PowerEdge R620, R630
Platform: Hardware
O/S Version: 5, 6
Platform (Other): Dell PowerEdge R620
Platform (Other): PERC H710P
Platform (Other): PERC H810P
Platform (Other): MegaCli
When running MegaCli commands such as the one below and/or the nwraidutil.pl, which runsMegaCli commands, the Failed to load libsysfs error displays. An example MegaCli command and the error would be:
/opt/MegaRAID/MegaCli/MegaCli64 -PDList -aALL
OSSpecificInitialize: Failed to load libsysfs.so.2.0.2 Please ensure that libsfs is present in the system.
The dependent library libsysfs.so.2.0.1 not available. Please contact LSI for distribution of the package
If using nwraidutil.pl version [2015.12.01] or later, you may see something like the following at the start of the output:
/opt/MegaRAID/MegaCli/MegaCli64 adpallinfo
OSSpecificInitialize: Failed to load libsysfs.so.2.0.2 Please ensure that libsfs is present in the system.
The dependent library libsysfs.so.2.0.1 not available. Please contact LSI for distribution of the package
Errors when running ldpdinfo were:
OSSpecificInitialize: Failed to load libsysfs.so.2.0.2 Please ensure that libsfs is present in the system.
The dependent library libsysfs.so.2.0.1 not available. Please contact LSI for distribution of the package
Errors when running pdlist were:
OSSpecificInitialize: Failed to load libsysfs.so.2.0.2 Please ensure that libsfs is present in the system.
The dependent library libsysfs.so.2.0.1 not available. Please contact LSI for distribution of the package
The latest version of nwraidutil.pl may be found in KB 000026993 -
How to download and use the RSA NetWitness RAID Utility
These errors are caused by missing x86_64 library files or missing symbolic links (symlinks).
- Download the following two files:
- Transfer the files to the appliance.
- Decompress lsi_libs_x86_64.tar.bz2:
tar xvjf lsi_libs_x86_64.tar.bz2 -C /opt/lsi/3rdpartylibs
- Make the script executable:
chmod +x lsi_libs_verify.sh
- Run the script:
./lsi_libs_verify.sh