Access Training
In order to register for a class, you need to first create an EMC account
If you need further assistance, contact us
Summary
This 90-minute on-demand learning module demonstrates the installation and configuration processes for a 10Gb capture interface card on the RSA NetWitness Packet Decoder.
Overview
The RSA Netwitness Packet Decoder can capture data at very high speeds with the addition of a 10Gb network interface card. This on-demand learning describes the card installation options, demonstrates the physical installation process, and then demonstrates the software configuration required to capture data at 10Gb speeds. Video demonstrations are supplemented by graphics and text to provide a thorough explanation of how to perform this important operation.
Audience
Anyone interested in 10G interface installation and configuration
Delivery Type
On-Demand Learning (self-paced eLearning)
Duration
1.5 hours
Prerequisite Knowledge/Skills
Students should have completed the following courses prior to taking this training:
RSA NetWitness Logs & Network Core Administration or equivalent experience
Learning Objectives
Upon successful completion of this course, participants should be able to:
- Physically install the 10Gb capture card into an RSA Netwitness Packet Decoder
- Perform the required software configuration to enable 10Gb capture
Course Outline
- 10G Card Installation: Requirements and Options
- Video Demonstration of 10G Card installation
- Software Configuration for 10G Capture: process outline
- Video Demonstration of 10G software configuration
Access Training
In order to register for a class, you need to first create an EMC account
If you need further assistance, contact us
