Brocade VDX 8770 Switch - Integration & Parser

[DeepanshuSood1]

Hi Pals,

Actually I have a requirement from one of my customer to integrate Brocade VDX 8770 Switch with RSA SA, but the challenge is that the customer is not aware of the fact how to integrate the switch with SA.

So just want to know that Brocade FastIron Switch (guide which is available on sadocs) will help to integrate the switch.

Is the same method i need to follow to integrate the VDX 8770 also.

Or if not then is anyone aware what's the method of integration & what are the commands need to run on the switch.

And also will Brocade FastIron Switch parser will work for VDX 8770 switch after proper integration of the same switch.

Rgds,

Deepanshu Sood.

[SoumyajitDhara]

Hi Deepanshu,

The device you refer from RSA Supported Event Sources - RSA Security Analytics Documentation  are not same for sure. After doing some search, the commands are acceptable on this device is more or less similar like cisco.

Please check with admin of the device as there must be a way to get logs from device.

[SalSanshez]

The Brocade admin guide makes reference to the Network OS Message Reference Manual. at the bottom of this post. 

... " Logging error messages Network OS provides several mechanisms for logging error messages including syslog, RASLog, and audit log. The types of message logging available and the setup procedures are documented in the "Introduction to Brocade Error Message Logging" chapter of the Network OS Message Reference Manual. "

admin guide:

http://www.brocade.com/content/dam/common/documents/content-types/administration-guide/nos-601-adminguide.pdf 

Network OS Message Reference Manual.: 

http://www.brocade.com/content/html/en/message-reference-guides/nos-601a-messageref/wwhelp/wwhimpl/js/html/wwhelp.htm 

[SalSanshez]

What is the desired result, security logs or operations? Hardware down, etc