NetWitness Community

Anonymous · ‎2013-11-09

I want to configure DAC with SA decoder and concentrator, so that all coming logs n packectes directly store on DAC rather than internal storage of appliances. What will be configuration, can anyone help?

Sent from Samsung Mobile

AdamRasnick · ‎2013-11-19

And to confirm the cabling, how have you cabled each appliance and DAC? did you just use one cable? or both cables?

Anonymous · ‎2013-11-19

I have attach each appliances like this

AdamRasnick · ‎2013-11-19

You only need to connect one cable...thats why the script freezes up.

If you connect both cables, the script freezes up.

Anonymous · ‎2013-11-19

Okay, how should i connect that cable?

Mean which one i have to remove?

Or can i ask where we will use that other cable?

Sent from Samsung Mobile

AdamRasnick · ‎2013-11-19

The second cable is just a spare..or can be used in multiple DAC connections. You however, need to go from B on the DAC (which is the lower part of the DAC) into the "circle" ports on the appliance.

Anonymous · ‎2013-11-19

What i got is?

I should use only one cable that would be left port on appliance decoder/ concentrator to left port on on DAC on lower part. From the pic which i have sent you earlier i have to remove right side connection, right????

Or in which order i have to run those scripts?

Sent from Samsung MobileAdam Rasnick <emc-community-network@emc.com> wrote:ECN

Can anyone help me in configuring DAC with decoder and concentrator

reply from Adam Rasnick in RSA Security Analytics - View the full discussion

The second cable is just a spare..or can be used in multiple DAC connections. You however, need to go from B on the DAC (which is the lower part of the DAC) into the "circle" ports on the appliance.

Reply to this message by replying to this email, or go to the message on ECN

Start a new discussion in RSA Security Analytics by email or at ECN

Following Can anyone help me in configuring DAC with decoder and concentrator in these streams: Inbox

Following Adam Rasnick in these streams: Inbox

AdamRasnick · ‎2013-11-19

That is correct. You will not run both scripts, you will only run the nwinitarray.py before you license the devices.

huanzhou1 · ‎2013-11-19

nwraidutil.py is already inside the appliance, you try to run or find.

The latest script need you to license the device first.

Anonymous · ‎2013-11-19

And nwmakearray.py i should run after licensed the device, right?

Adam you told me that both scripts would not run on each appliances, so can you please tell me, on which appliances i have to run both scripts or on which appliances i have to run only one scripts?

Sent from Samsung Mobile

Anonymous · ‎2013-11-19

Actually, I am new with dac mapping

Sent from Samsung Mobile